GAMC
  • Home
  • Events
  • Authors & Publications
    • Automotive
    • Medical
    • Lasers
  • Proceedings
  • Products
  • News
  • About
    • Contact Us
    • Membership
    Abbott XIENCE V® Stent Design Rationale

    by Nadine Ding from ALAC 2010

    An Analytical and Experimental Approach to Understand the Physics of EGR Cooler Fouling

    by Daniel J. Styles, Michael Lance, Scott Sluder, John Hoard, Dennis Assanis, Eric Curtis, Nitia Ramesh, Mehdi Abarham, John Storey, Steve Simko from Emissions 2011

    An Implantable Artificial Kidney using Silicon Membranes

    by Shuvo Roy from ALAC 2010

    Biopolymers Containing Selenium: Their Synthesis And Use

    by Ted Reid from IMD Expo 2010

    Challenges and Room for Improvement in Full Cycle Simulation

    by Yang Hu, Kaiping Li, Hao Hu, Sathya Dev, Syed Rizvi from IABC 2010 Troy

    Chevrolet Volt Upper Structure Development

    by Steve McCallum from IABC 2010 Troy

    Climate Change: The Evidence and our Options

    by Lonnie G. Thompson from Emissions 2011

    Comparison of Various Laser sources for Cutting Applications in the Medical Device Industry

    by Stefan Quandt from ALAC 2010

    Design Driven Development: The D3 Process

    by Tom KraMer from IMD Expo 2010

    Development of Double Sheet Hydroforming Technology

    by Masahiko Sato, Atushi Tomizawa from IABC 2010 Munich

    Development of Online Weld Modeling Tool for Automotive Applications

    by Menachem Kimchi, Wei Zhang, Yu-Ping Yang, John Bohr from IABC 2010 Munich

    E-Coat Simulation: Art of Science

    by Robrecht Belis from IABC 2010 Troy

    E-Coat Simulation: Art of Science

    by Robrecht Belis from IABC 2010 Munich

    Examination of Particle Number and Mass Emissions from Light Duty Vehicles and How These Are Measured to Meet Current and Future

    by Matti Maricq from Emissions 2011

    External Flow Simulation with Open Sun Roof and Optimization for .Reduced Noise to Passengers

    by JS Rao, Ashish Singh from IABC 2010 Munich

    Formability of Wrought Magnesium Sheet for Different Strain Conditions

    by Michael Miles, David Fullwood, Brent Adams, John Scott, S. Rogers, Ali Khosravani, Raj Mishra from IABC 2010 Troy

    Friction Bit Joining of AZ31 Mg and DP 980 Steel Sheets

    by Michael Miles, Zhili Feng, Becky Gardner, Kent Kohkonen, Russell Steel from IABC 2010 Troy

    Frontloading – Why Do We Need Simulation and Highly Dynamic Test Beds?

    by Klaus Pfeiffer from IABC 2010 Munich

    Fuel Injection Strategies to Enable Low Temperature Combustion in a Light-Duty Diesel Engine

    by Xiaoye Han, Ming Zheng, Jimi Tjong, Tongyang Gao from IABC 2010 Troy

    Global Reaction Kinetics Development for Precious Metal Coated Wall Flow Monoliths

    by Richard Blint from Emissions 2011

    Global Reaction Kinetics Development for Precious Metal Coated Wall Flow Monoliths

    by Richard Blint from Emissions 2011

    Hot-Formed Steel in Car Body Structures

    by Mikael Fermér, Johan Jergéus, Richard Johansson, Johnny Larsson from IABC 2011 Munich

    Integrated Driveability Assessment and Optimization Environment on a Roller Test Bench

    by Albert Albers, Christian Zingel from IABC 2010 Munich

    Latest Developments in High Productive Laser Technology and its Application in Car Body Manufacturing

    by Jürgen Schmid, Rüdiger Brockmann from IABC 2010 Munich

    Load Prediction & Fatigue Simulation – Total Vehicle Body System

    by Alexander Schick, Boris Kuenkler from IABC 2010 Munich

    Maneuver Based Testing – Proving Ground Tests at the Powertrain Test Bed

    by Klaus Pfeiffer, Ferry Illmeier from IABC 2010 Munich

    Metallic Glass Coatings for Enhanced Hi-Temperature Tribological Coatings

    by John Bilello, Jon Paggett, Kam Yan from IABC 2010 Troy

    Methodology for Verification of DPF Soot Loading Predictions for Off-Road Applications

    by Thomas Harris, Fan Su, Remy Mercie, Kendall Duffield from Emissions 2011

    Oil Pressure, Level & Condition Sensors for Efficient Oil & Engine Management

    by Torsten Eggers, Heiko Dobrinkski, Thomas Niemann, Jörg Stürmann from IABC 2010 Munich

    Optimized Self- Piercing Rivets - Successful High-Quality . Riveting Of Advanced High-Strength Steel

    by Sumanjit Singh, Wolfgang Wenzl, A. S. Wenzl, Anne Schulz-Beenken, Peter Gösling, Baris Gökce from IABC 2010 Munich

    Predictions of Springback in the S-rail Stamping of AHSS

    by Hyunok Kim, Menachem Kimchi, Nimet Kardes, Yurdaer Demiralp, Osman Mete, Taylan Altan, Osman Hamdi from IABC 2010 Troy

    Properties Optimization on Car Body Modules Through .Adequate Selection of the Joining Processes

    by Laurent Cretteur, Nicolas Bailly, Aurélien Pic, Atanas Tchorbadjiysky, Laurent Cotinaut from IABC 2010 Munich

    Recent Advances in Eye Safer (1.5 to 2.1micron) Silica Glass Fiber Lasers Useful for Medical Applications

    by Martin Seifert from ALAC 2010

    Resorbable Lactide Based Polymers for Medical Devices

    by Michiel van Alst from IMD Expo 2010

    Sheared Edge Cracking in AHSS Body Panel Stamping - Challenges and Efforts

    by Changqing Du, Dajun Zhou from IABC 2010 Munich

    Small Spark Ignition, Non-Handheld Engine Emission Reduction and Phase III Regulatory Compliance Strategies

    by Michael Major from Emissions 2011

    Switchable Water Pump for Engine Thermomanagement

    by Tommaso Di Giacomo from IABC 2010 Munich

    The ACP Process: The Future of Product Design and Development

    by Akbar Farahani, Paul Dolan, Hamed Sharifi from IABC 2010 Troy

    The Effects of E20 on Elastomers Used in Automotive Fuel System Components

    by Bruce Jones, Gary Mead, Paul Steevens, Chris Connors from Emissions 2011

    The New 1.6L Turbocharged MINI Cooper S Engine with Direct Injection and Fully Variable Valve Train

    by Johann Schopp, Gerrit Kiesgen, Bernhard Lechner from IABC 2010 Munich

    Therapeutic Applications of Surface Modified Biomaterials:Treatment and Prevention of Infectious Diseases

    by Bob Ward from IMD Expo 2010

    Thermostats with Integrated Thermal Management Functions

    by Eike Willers, Andreas Auweder, Paul Glaser from IABC 2010 Munich

    Ultra-low NOx with Diesel Enhanced Premixed Combustion and a Long-breathing Lean NOx Trap Strategy

    by Ming Zheng, Jimi Tjong, Marko Jeftić, Usman Asad, Meiping Wang, Graham Reader from Emissions 2011

    Ultra-Short Pulse Laser Technology for Metal and Polymer Material Processing in the Medical Device Industry - Case Demonstrat

    by Stefan Quandt from IMD Expo 2010

    Urb-e, a Prototype by ENEA for a Hybrid City Car

    by Ennio Rossi, Carlo Villante from IABC 2010 Munich

Upcoming Conferences

Battery Conference 2012

Apr 23 - 24, 2012

University of Michigan – Michigan League

Ann Arbor, Michigan

Sponsored By: Battery Congress

Emissions 2012

Jun 12 - 13, 2012

Student Center - Eastern Michigan University

Ypsilanti, Michigan

Sponsored By: Emissions

IABC 2012 Troy

Oct 24 - 25, 2012

MSU - Management Education Center

Troy, Michigan

Sponsored By: Body Congress

GPC 2012 Troy

Oct 24 - 25, 2012

MSU - Management Education Center

Troy, Michigan

Sponsored By: Global Powertrain Congress

Las Vegas - Executive Forum

Feb 20 - 21, 2013

Harrah's Las Vegas

Las Vegas, Nevada

Sponsored By: Advanced Laser Applications Conference

Las Vegas - Executive Forum

Feb 20 - 21, 2013

Harrah's Las Vegas

Las Vegas, Nevada

Sponsored By: International Medical Devices Exposition

Las Vegas - Executive Forum

Feb 20 - 21, 2013

Harrah's Las Vegas

Las Vegas, Nevada

Sponsored By: Global Powertrain Congress

© 2009 Gadget